Introducing our BabyMaker1000
This valve body is a must have for any Cummins owner 2007.5 to 2018.
Why do You need the BabyMaker?
The OE valve body is a huge problem on these trucks! They can develop cross leaks, warping, worn solenoid switch valves, and blown out and broken accumulators.
These problems are all addressed with the BabyMaker1000
How Did We Solve The Problems?
We Disassemble the valve body then we flat sand it on our sanding stone certified to .000150,
Next the solenoid switch valve is bored out and the Transgo switch valve kit is installed this corrects and prevents multiple codes such as low reverse and tcc switch valve codes, overdrive clutch failure, and overdrive and low reverse pressure rationality codes.
Next we install the sonnax accumulator kit and accumulator cover the benefits on these are better sealing accumulators and relocated sealing ring location allowing even worn out bores to work better than new!
The sonnax accumulator plate cover provides an additional 3 screws over the OE design allowing for higher pressure without risk of blowing the plate off.
Next is the DNJ channel plate this beautiful piece ensures there will be no problems with warping or flex under high pressure and heat shallow passages also allow quicker transfer of fluid where it's needed the most.
What Do You Get?
All valve body's include new OE solenoids and will work in all years 2007.5 to 2018 with the 68rfe transmission. The BabyMaker1000 will allow the option to run up to 250psi although we never recommend more than 225psi.