68RFE Transmission Stage 1 2019+
68RFE Transmission Stage 1 - 500HP MAX
Includes Babymaker 2000 Billet Channel Plate Valve Body
2019+ 68RFE Stage 1 - 500HP Max
- Babymaker 2000 Billet Channel Plate
- Sonnax accumulator plate cover
- 4c power-pack, gpz or equivalent clutches, custom
pressure plate - Revmax or equivalent input drum with custom overdrive
pack - RANDY’S Billet twin disc torque converter
- New solenoid block
- New line pressure sensor
- 2c power-pack with billet piston
- Billet Steel spin on filter adapter
- HD Cast aluminum deep pan
THIS IS THE INFORMATION YOUR TUNER WILL NEED TO PROPERLY TUNE FOR THE BABYMAKER:
-
LINE PRESSURE SET TO 225PSI ABOVE 30% THROTTLE ANGLE
-
100PSI RESTING PRESSURE
-
NO LOCKUP UNTIL 4TH GEAR
-
LOW/REVERSE SPRAG HOLDOUT
-
FOR 2019+, UNDERDRIVE PULSE TEST MUST BE TURNED OFF.
| Brand | Randy's Transmissions |
|---|
WARRANTY
68RFE 2 Year unlimited mile limited warranty will not cover broken cases or shafts of transmission including the 4th clutch hub. Any tires larger than a 35” tire must have proper gearing or warranty will be voided. Vehicle owner is responsible for having proper transmission tuning as transmission failure due to lack of tuning or improper tuning will not be a covered failure. Abuse, misuse, or burn down due to operator error will void warranty. Any warranty work must be performed at Randy’s Transmissions in Tooele UT. It is the vehicle owner’s responsibility to ship transmission or vehicle to Randy’s location for any and all repairs needing to be performed. Any repairs to transmission not authorized by Randy’s Transmissions will void warranty and will not be covered by Randy’s Transmissions.
WARRANTY IS NON-TRANSFERRABLE
Appropriate gear ratios
- 35" tire min gearing is 3:73 recommended 4:10
- 37" tire min gearing is 4:10 recommended 4:30
- Larger than that should be running a 4:56 ratio