BABYMAKER 2000 KIT - 19+ 68RFE
Billet Channel Plate With Valve Body, Filters, Deep Pan, Gasket and Billet Filter Adapter.Â
For 19+ 68RFE Transmissions
To unlock the full potential of the Babymaker, it requires trans tuning.Â
Scroll down for tuning specs.
If you do not have tuning, this will, at minimum eliminate cross leaks.
FOR 2019 AND UP 68RFE TRANSMISSIONS
The valve body is flat sanded to our tolerances. We install HD billet accumulators proven to prevent bore wear and
provides unsurpassed sealing qualities. Sonnax accumulator plate cover with 3 additional bolts
eliminating plate blowout. SSV is reamed out and Transgo switch valves are installed to correct wear and leaks. All valve body bores are vacuum tested to insure hydraulic integrity. HD billet channel plate is installed onto the valve body and torqued to our specifications preventing cross leaks which results in premature transmission failure.
Includes new O.E solenoid block.
Comes With:
Valve Body, Deep Pan, Gasket, Filters, And Billet Filter Adaptor.
THIS WILL NOTÂ FIX A TRANSMISSION WITH RATIO CODES. IF YOU'RE EXPERIENCING THIS ISSUE, THE TRANSMISSION IS HURT.Â
THIS IS THE INFORMATION YOUR TUNER WILL NEED TO PROPERLY TUNE FOR THE BABYMAKER:
-
LINE PRESSURE SET TO 225PSI ABOVE 30% THROTTLE ANGLE
-
100PSI RESTING PRESSURE
-
NO LOCKUP UNTIL 4TH GEAR
-
LOW/REVERSE SPRAG HOLDOUT
-
UNDERDRIVE PULSE TEST MUST BE TURNED OFF.
| Brand | Randy's Transmissions |
|---|
